The followings are several successful aspects of the use of ozone:
1. Workshops and processing equipment
The traditional disinfection method is suffocating with formaldehyde and other chemical reagents. This method has been confirmed to have many shortcomings. Some recent foreign researches have proved that ozone is a better and safer constituent of formaldehyde because it can restrain the growth of coliform and microzyme greatly. And it is convenient and effectual to disinfect food processing plant, storage house and processing equipment with ozone.
You should connect ozone generator with central air conditioner ventilation and ozone is sent to its wind channel by vortex air blower and then to every clean district. According to Ministry of Public Health, the air disinfection ozone density should be 5 ppm. But in fact the disinfection in clean districts is not only for the air but also surface of all objects, so the normal density should be more than 10ppm. Make the conditioner running for 1.5--.2.0 hours before being on duty and 1 hour after being off duty, which can guarantee the swim fungus and subside fungus meet the requirements of SSOP.
It can be seen from the examine report of food factories using ozone that the amount of fungusi is totally qualified and ozone can replace formaldehyde suffocating completely. Meanwhile it reduces the consumption and the nonmanufacturing operation. If the clean district or test area has no ventilation but only fresh air intake, FD-Q-H air disinfector can be chosen. It is controlled by computer and is timed to send ozone to every district even every corner. Besides this point, it is movable.
2. Sterilization of space
It is useful to sterilize frozen food and drinks, processing plants of meat, eggs ad milk and packing workshops with ozone which can also get rid of the bad taste. For example, use ozone to disinfect for 2 hours in a 150 m3 workshop (the ozone concentration is about 4×10-6), compare the following data:
Bacterium total amount (piece/ m3) before disinfection/after disinfection
Cooling room 105 26
Packing room 1325 0
As for other rooms, ozone generators can be chosen to install inside the room directly. And disinfection time can be fixed according to your needs and generator can stop automatically after disinfection. You can choose different kinds of generator according to the room size only if meeting with the demand of ozone concentration.
3. Sterilization of articles’ surface
It is needed to sterilize raw materials, instruments and equipments, packing articles and operating room in the course of food production. The traditional method is ultraviolet radiation disinfection but it is not overall and the effect reduces quickly and it has no effect on some germs. It is introduced in “Disinfection Technical Specifications” that the surface germs can be killed after surrounded by ozone for some time
Appendix: A Brief Introduction of Air Purifying and Sterilization series
It accords with the standard of “Disinfection Technical Specifications" of Ministry of Public Health. And the Air Purifier combines many technical fruits and can meet the demands of SSOP. In addition, DJ-Q and FD-Q have long lifetime and simple structures and is light and convenient to install and operate.
Scope of application:
1. The DJ-Q series cooperating with HVAC: using electrolytic water ozone generating technology, with the characteristics of high ozone concentration (3 times as that of discharge technology), good output, can be used to disinfect air and processing plants.
2. FD-Q (A) series: It adopts 15000v cold cathode discharge technology and can produce lots of ozone and cooperate with HVAC or special air disinfector to disinfect workshops in big areas.
3. FD-Q (H) hanging series: Used in part and separate room’s sterilization (air and surface), including control zone packing shop facility, etc.